Jump to content

Test της JBL?hELP


Recommended Posts

Μπορει καποιος να μου πει πως θα χρησιμοποιησω το τεστ αμμωνιας JBL?

Ουτε οδηγιες στα αγγλικα δεν εχει.

Link to comment
Share on other sites

Instructions

Long-term measure: use a suitable biological filter. Reduce feed, reduce stock density of fish, if necessary. Filtration with JBL AmmoEx.

1. Repeatedly rinse both test jars with the water to be tested.

2. Use the enclosed syringe to fill each of the test jars with 5 ml of sample water.

3. Add the reagents to one of the test jars in the following sequence:

A.) 5 drops of reagent 1, mix well!

B.) 5 drops of reagent 2, mix

C.) 5 drops of reagent 3, mix

4. Place both test jars into the comparator block: the jar with added reagent into the smooth end of the comparator block, the jar with untreated test water (blank sample) into the notched end of the comparator block.

5. Move the comparator block together with both test jars side to side over the colour chart until the colour of the sample with added reagent matches the colour of the blank sample.

6. Read the ammonium content in the notch of the comparator.

από το Site της JBL

Link to comment
Share on other sites

Μπορει καποιος να μου πει πως θα χρησιμοποιησω το τεστ αμμωνιας JBL?

Ουτε οδηγιες στα αγγλικα δεν εχει.

6152[/snapback]

Συνήθως έχει στα αγγλικά (το δικό μου έχει τουλάχιστον). Και πίσω απο το χαρτί με τις χρωματικές αποχρώσεις για τη μέτρηση, έχει και σχηματική απεικόνιση. Αν θές πιο αναλυτικές οδηγίες απο αυτές που παρέχει το σχήμα (ή αν δεν υπάρχει το σχήμα στο δικό σου τέστ), οι οδηγίες είναι αυτές που σου έγραψε παραπάνω ο Νίκος.

Link to comment
Share on other sites

Ποπο!Πως δεν το σκεφτηκα να μπω στο site.

Thanks!!

Link to comment
Share on other sites

Δημιουργήστε ένα λογαριασμό ή κάντε είσοδο για να σχολιάσετε

Πρέπει να είστε μέλος για να προσθέσετε ένα σχόλιο

Δημιουργία λογαριασμού

Δημιουργήστε ένα νέο λογαριασμό. Είναι εύκολο!

Δημιουργία λογαριασμού

Σύνδεθείτε

Έχετε ήδη λογαριασμό; Συνδεθείτε εδώ.

Είσοδος
×
×
  • Create New...